15-5 ph Stainless Steel Bar

15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.

Applications:

  • Aircraft components
  • High pressure corrosive fabricated parts such as valves
  • Shafts
  • Fasteners
  • Fittings and gears
Filter Products

Don’t see what you need? Request a Quote

Temper
Specification
OD
Manufacture Method
Shape
Grade
Diameter

Items 1-10 of 176 Products

Page
English Metric
per page
Set Descending Direction
SKU Description DFARS Manufacture Method Diameter Shape Specification
Sku: A6819 Description: 15-5 VAR AMS5659 1.7500 x 12 FT MLS DFARS: No Manufacture Method: VACUUM ARC REMELT Diameter: Shape: Specification: AMS5659 AMS-H-6875
Sku: A3692 Description: 15-5 AMS 5659 1.7500 DFARS: No Manufacture Method: HOT ROLLED ANNEALED & PICKLED Diameter: Shape: Specification: AMS 5659 BAC 5439
Sku: A3534 Description: 15-5 AMS 5659 1.0000 x 12FT R/L DFARS: No Manufacture Method: VACUUM ARC REMELT Diameter: Shape: Specification: AMS5659 BAC 5619
Sku: A3531 Description: 15-5 AMS 5659 .7500 x 12FT R/L DFARS: No Manufacture Method: HOT ROLLED ANNEALED & PICKLED Diameter: Shape: Specification: AMS5659 AMS-H-6875
Sku: 84146 Description: 15-5 AMS 5659 1.7500 x 12' RL DFARS: No Manufacture Method: ELECTRIC SLAG REMELT Diameter: Shape: Specification: AMS5659 AS6279
Sku: 57487 Description: 15-5 AMS 5659 8.5000 DFARS: Yes Manufacture Method: HOT ROLLED ANNEALED & PICKLED Diameter: Shape: Specification: AMS5659 AS6279
Sku: 48666 Description: 15-5 AMS 5659 2.3750 DFARS: No Manufacture Method: ELECTRIC SLAG REMELT Diameter: Shape: Specification: AMS5659 AS6279
Sku: 44351 Description: 15-5 AMS 5659 5.5000 DFARS: No Manufacture Method: ELECTRIC SLAG REMELT Diameter: Shape: Specification: AMS5659 AS6279
Sku: 33211 Description: 15-5 AMS 5659 .6875 DFARS: Yes Manufacture Method: HOT ROLLED ANNEALED & PICKLED Diameter: Shape: Specification: AMS5659 AS6279
Sku: 33029 Description: 15-5 AMS 5659 5.5000 DFARS: No Manufacture Method: HOT ROLLED ANNEALED & PICKLED Diameter: Shape: Specification: AMS5659 AS6279

Items 1-10 of 176 Products

Page
English Metric
per page
Set Descending Direction
Typical Chemical Requirements
15-5 PH Stainless Steel Condition A (annealed)
Minimum Properties
Ultimate Tensile Strength, psi 161,000
Yield Strength, psi 140,000
Elongation 7.6%
Rockwell Hardness C35
Chemistry
Iron (Fe) 71.91 - 79.85%
Carbon (C) 0.07% max
Chrome (Cr) 14 - 15.5%
Manganese (Mn) 1% max
Niobium (Nb) + Tantalum (Ta) 0.15 - 0.45% max
Nickel (Ni) 3.5 - 5.5%
Phosphorus (P) 0.04% max
Sulphur (S) 0.03% min
Silicon (Si) 1% max

ASK US A QUESTION